PrimoChill Vue PC-V32-CBLT - Pre-Mix (32oz) - Opaque Cobalt

IN ORDER TO MAINTAIN YOUR VUE EXPERIENCE AT IT'S BEST, PLEASE READ THE INCOMPATIBILITY REFERENCE GUIDE BELOW: Bay Reservoirs: Bay reservoirs require a gap of air to remain in the reservoir for it to function properly. Additional air introduced to a loop running Vue causes Vue to breakdown overtime.   Aluminum watercooling components: Aluminum water-cooling components are not compatible with Vue as over a brief period Vue breaks apart and loses all Vue effects.   Mayhem Pastel, EK Cyrofuel, Thermaltake C1000 coolants: The following coolants tend to leave residue that cannot be removed with a simple flush of the system, complete scrubbing of cooling components prior to adding Vue to a loop is the only way around this incompatibility.   Thermaltake radiators: Thermaltake radiators are constructed of aluminum, which makes the Vue break apart and lose all it's effects.   Enermax NEOChanger Reservoir: Enermax NEOChanger Reservoir has an aluminum cap that comes in contact with Vue and breaks it down over a short period of time.   Silver Coils, Silver components, Silver plated components: Silver Coils, Silver components, and Silver plated components are not compatible with Vue as the release of silver from these sources break the structure of Vue and will cause the fluid to lose all effects.   Addition of water, dyes, anti-microbial, anti-corrosive: Due to how Vue was made, addition of water, dyes, anti-microbial, and anti-corrosive will cause Vue to break down. Topping of your loop requires adding the same color, as each color is balanced to specific levels that should not be altered. PLEASE BE SURE TO READ ALL THE WARNINGS BELOW TO AVOID VOIDING YOUR WARRANTY. PrimoChill has gone to great lengths to make Vue as easy to use as possible, but please keep in mind that Vue is for experienced users looking for that extra aesthetic and requires more attention and maintenance. During the filling of your loop, induction of any air is NOT recommended. Allowing the pump to suck air into the loop or running it dry may cause PrimoChill Vue to break down and fail. Slowly add PrimoChill Vue to your system to make sure you are not adding any additional air into the system. It?s recommended to have direct manual control over the speed/power of your pump when adding PrimoChill Vue to your loop. Run it at a medium-low speed with the ability to turn off the pump quickly if necessary. Cycling your pump on and off during the filling process will help in reducing the amount of air that you allow into the system. For best results, use Vue with a newly built watercooling loop. If this is not possible, first ensure that each component is thoroughly cleaned by hand and dried. Next, use PrimoChill System Reboot to flush the system prior to adding PrimoChill Vue. Vue has a HIGH attraction to dyes. It's possible that Vue may leach old dyes out of components that had previous dyed coolants ran through them (radiators in particular). No amount of flushing with water will remove all previous dyes. This may result in Vue changing color slightly. For best results flush your system with PrimoChill System ReBoot prior to using VUE in existing systems that contained dyed coolant. Continuous running of the pump is not recommended. Allow the PC to rest when not in use. Run the PC for at least an hour every couple days enabling Vue to recirculate. It will thank you. Please be advised that the color and texture of Vue may change slightly compared to the fluid in the bottle over time once you put it in your loop. Vue may develop clear areas in the top of the reservoir and tubes as it reacts with metals and chemicals in your loop resulting in a slightly thicker fluid. This will not impact the performance of Vue. Running the pump will return Vue to its original state. This product is NOT intended to be used in conjunction with any other coolant or additive. Vue contains biological inhibitors so no additional coolant or additives are needed.

Please visit https://keepingit.cool/vue before you order this product so you are aware of all the incompatibilities as well as the limits of Vue usage.


• Bottle Size: 32 fluid ounces
• Mix Ratio: None-Ready to use
• Water-based fluid
• Non-toxic & environmentally friendly
• Biodegradable

• Water-based fluid
• Non-toxic & environmentally friendly
• Handmade in small batches for unmatched quality control
• Flushes clean from loop
• Visual indicator useful to illustrate fluids flow patterns