HyperX FURY 16GB 2 x 8GB DDR3 SDRAM 1866 Desktop RAM HX318C10FBK2/16

HyperX FURY 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1866 Desktop Memory Model HX318C10FBK2/16. Feel like your computer is getting sluggish or do need more applications running simultaneously? Then try upgrading your system's RAM with Kingston HyperX Fury 16GB 1866MHz memory modules. Upgrading your RAM is the most cost-effective way of boosting your system's performance and increasing multitasking headroom. Adding some of these high-performance Kingston HyperX Fury modules will significantly boost the responsiveness of your computer.

The HX318C10FBK2/16 from Kingston offers you 16GB (2 x 8GB) of DDR3-1866 RAM. This 240-pin DIMM memory comes in a Black / Silver design. Advanced specifications of this RAM are: CAS Latency of 10, voltage of 1.5V, unregistered/unbuffered, Non-ECC, and has a heatsink/cooler installed.

• DDR3 1866
• Timing 10-11-10
• Cas Latency 10
• Voltage 1.5V
• HyperX
• FURY Series
• HX318C10FBK2/16
• Capacity: 16GB (2 x 8GB)
• Type: 240-Pin DDR3 SDRAM
• Speed: DDR3 1866
• Cas Latency: 10
• Timing: 10-11-10
• Voltage: 1.5V
• Dual Channel Kit
• Black Color
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 933MHz fCK for 1866Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm +/- 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85 Degree C, 3.9us at 85 Degree C < TCASE < 95 Degree C
• Asynchronous Reset
• PCB: Height 1.180" (30.00mm), double sided component

• DDR3 1866
• Timing 10-11-10
• CAS Latency 10
• Voltage 1.5V

Manufacturer：HyperX
Classification：FURY
MPN：HX318C10FBK2/16
Size：16GB (2 x 8GB)
Type：240-Pin DDR3 SDRAM
Speed：DDR3 1866
Timing：10-11-10
Voltage：1.5V
Multi-channel Kit：Dual Channel Kit
Color：Black
Features：JEDEC standard 1.5V (1.425V ~1.575V) Power Supply

VDDQ = 1.5V (1.425V ~ 1.575V)

933MHz fCK for 1866Mb/sec/pin

8 independent internal bank

Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6

Programmable Additive Latency: 0, CL - 2, or CL - 1 clock

8-bit pre-fetch

Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]

Bi-directional Differential Data Strobe

Internal(self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)

On Die Termination using ODT pin

Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C

Asynchronous Reset

PCB: Height 1.180" (30.00mm), double sided component